Item NO.:
SF-CM-001Payment:
L/C, D/A, D/P, T/T, Western Union, MoneyGram.Product Origin:
Xiamen ChinaShipping Port:
XiamenLead Time:
2 weeksProduct Description
Solar carport mounting solution
1. Enables easy,fast and cost-effective installation.
2. Flexible post spacing withstands different wind&snow loads.
3. High quality material in galvanized steel and SUS 304.
4. Highly corrosion resistant surface treatment.
5. Screws and nuts go with every componts needed.
6. Fasteners and rail nut fully configured to save extra parts purchasing.
7. Mechanical calculation and reliability tested to ensure highset product quality.
8. 12-25 years system and structural guarantee.
Function:
1.Double functions,Provide shade ,generated the solar power and protect your cars;
2.More types as your requirements,according to the function,we have simplify carport ans waterproof
canopy.According the figure,we have double pole ,semi cantilever,full cantilever, customized design
available.
| Type: | Solar carport mounting solution |
| Installation site: | According to your requirements |
| Material: | Aluminum Alloy |
| Fasten material: | Aluminum , SUS304, galvanized Steel |
| Survival Wind Speed: | < 60m/s |
| Design Snow load: | Up to 1.4KN/ Square meters |
| Solar panel type: | Framed or Frameless |
| Panel Orientation: | Transverse or vertical |
| Design Standard: | CE;IOS9001;SGS |
| Quality warranty: | 12-25 years |
| Duration: | More than 20 years |
| Delivery time: | 7-15 days |
| Package: | Standard Packing |
Photo Show
Solar Carports offers a fexible,simple and affordable solution for Solar Mounting System. Solar carports utilize exisiting parking areas to generate renewable power and provide shaded or covered parking for autos,electric charges,on gird mw solar systems.
Solar First Aluminum Carport Mounting Systems specializes in manufacturing and designing to meet the needs of various pole mount installation.
Solar First Carport Mounting System product introduction specializes in Solar First carport mounting manufacturing and designing to meet the needs of various pole mount installation.
SF aluminum solar carport is made of high-strength aluminum alloy to meet customer's demand for safety installation, efficiency and aesthetics. To maximize the use of space, the carport bracket utilizes a special structural design, which allows to park two or four cars in each unit.
Easy To Install---The simple design and pre-assembled components ensure a quick and easy installation.
Horizontal Single Axis Traker
SF-RC Roof Clamp Series Dimensions (mm) A B C D SF-RC-01 18 13.5 10.5 10 SF-RC-02 26 12 10.5 18 SF-RC-03 35 21.6 2.5 31.5 SF-RC-04 16.3 16.3 2.5 12 SF-RC-05 15 12.2 10 10 Technical Details Installation Metal Roof Wind Load up to 60m/s Snow Load 1.4kn/m2 Tilt Angle Parallel to Roof Surface Standards AS/NZS1170, JIS C8955:2017, GB50009-2012, DIN 1055, IBC 2006 Material Anodized Aluminum AL 6005-T5, Stainless Steel SUS304 Warranty 10 Years Warranty
Steel Solar Ground Carports offers a fexible,simple and affordable solution for solar mounting system.solar carports utilize exisiting parking areas to generate renewable power and provide shaded or covered parking for autos,electric charges,on gird mw solar systems.
Characteristics ·Uninterruptible power supply, switching within 20ms, peak-shaving and valley-filling ·Multiple working modes, so that the rate of self-use reaches 95% ·High charging and discharging efficiency, improving the economic benefits of the system ·Compatible with lead-acid and lithium batteries, and can match economic solutions in different markets ·Intelligent BMS management function to improve battery reliability ·Using high-frequency isolation technology to make the system safer and longer service life ·24-hour intelligent energy management, one-button remote control and upgrade function, real-time grasp of the status of photovoltaic power plants Application ·Places where there is no spare power due to power outages or photovoltaic self-use ·Places where the electricity price for self-use is higher than the on-grid price ·Places where the peak electricity price is higher than the normal electricity price System Parameters Solar panel power 400W Solar panel voltage 41V Number of solar panels 12PCS 14PCS 20PCS Photovoltaic DC cable 1 SET MC4 connector 1 SET Battery voltage 48V Battery capacity 100Ah 200Ah Battery communication method CAN/RS485 Inverter off-grid rated output power 3KW 5KW Maximum output apparent power on off-grid side 4. 5KVA, 10S 7KVA,10S Rated output voltage on off-grid side 1/N/PE, 220V Rated output frequency on off-grid side 50Hz Off-grid switching time <20ms Rated output power of inverter connected to the grid 3KW 3.6KW 4.6KW 5KW 6KW Maximum output apparent power on the grid-connection side 3.3KVA 4KVA 4.6KVA 5.5KVA 6KVA Rated output voltage on grid side 1/N/PE,220V Rated output frequency on grid side 50Hz Working temperature -25~+60°C Cooling method Natural cooling Maximum working altitude 3KW AC output copper core cable 1 SET Distribution box 1 SET Auxiliary material 1 SET Photovoltaic mounting type Aluminum /Carbon steel mounting （one set）
SF-HVT SERIES The SF -HVT series household lithium batteries adopt afully automatic thermal management system, CTP no-moduletechnology, high-efficiency heat pump heating technology, andaluminum alloy body design, which will expand the workingtemperature range of the battery,increase the consistencybetween battery cells, and achieve a more flexible appearancedesign. This will achieve a new generation of householdenergy storage lithium batteries with safer, more exquisite, andlonger service life. Fully automated thermal management system SOLARFIRST's self-developed lithium battery thermal management system(BTMS)ismainly alithium battery temperature control technology system that uses circulating liquid as the medium for heat exchange. CTP TECHNOLOGY The CTP technology(Cell To Pack)of SOLARFIRSTThe CTPhousehold energy storage lithium batteries directly integratesthe battery cells into a battery pack, subtracting the modulelink, forming a non module form, which improves the overallenergy density.The battery thickness is only 18cm,significantly reducing the volume and failure rate compared todomestic high-voltage stacked lithium battery products on themarket, greatly improving safety, and having no wiring harnessand connector connections between modules, making thestructure simpler, Installation is extremely convenient, whilealso reducing the weight of the battery pack. SF-ELS-T SERIES LITHIUM BATTERY Model SF-ELS10K-T SF-ELS14K-T Battery Type LiFePO4 Standard voltage 51.2Vdc 51.2Vdc Voltage range 46.4~57.6Vdc 46.4~57.6Vdc Cell capacity 200Ah 280Ah BAT capacity 10.24kWh 14.33kWh DOD Max.100 % DOD (settable) Cycle life(25℃，0.5C/0.5C,80%DOD) >6000 >10000 Rated power 7000W 10000W Max Charge/Discharge current 140A 200A Dimension (H*W*D) 1169.5*640*196mm 1169.5*640*196mm Weight 114.5kg 137.5kg BAT Operating ambient temperature -20~60℃ Cell Continuous Operating Temperature 10~35℃ DisplayHumidity 0~95%RH(Non-condensing) Thermal management Type Liquid Cooling/Heating Display LED+APP Communication RS485,CAN Installation Floor mounted & Fixed to wall IP Grade IP65 Certification CE,IROHS,MSDS,IEC 62619.UN 38.3.CE-EMC SF-HVT SERIES LITHIUM BATTERY Model SF-8K-HVT SF-9K-HVT SF-11K-HVT SF-13K-HVT SF-14K-HVT Battery Type LiFePO4 Standard voltage 172.8Vdc 192Vdc 230.4Vdc 259.2Vdc 288Vdc Voltage range 156.6~194.4Vdc 174~216Vdc 208.8~259.2Vdc 234.9~291.6Vdc 261~324Vdc Cell capacity 50Ah BAT capacity 8.64kWh 9.6kWh 11.52kWh 12.96kWh 14.4kWh DOD Max.100 % DOD (settable) Cycle life(25℃，0.5C/0.5C,80%DOD) >8000 Rated power 6000W 6500W 8000W 9000W 10000W Max Charge/Discharge current 50A Dimension (H*W*D) 1116.5*640*197mm 1196*640*197mm 1356*640*197mm 1475.5*640*197mm 1595*640*197mm Weight 103.5kg 113.5kg 130kg 145kg 153.2kg BAT Operating ambient temperature -20~60℃ Cell Continuous Operating Temperature 10~35℃ DisplayHumidity 0~95%RH (Non-condensing) Thermal management Type Liquid Cooling/Heating Display LED+App Communication RS485, CAN Installation Floor mounted & Fixed to wall IP Grade IP65 Certification CE,IROHS,MSDS,IEC 62619, UN 38.3.CE-EMC
Floating Mounting System Structure Anchoring System Combiner Box Bracket, Cable Trunking, Aisle Types of Trunkings Visiting Aisle Technical Details Design Description: 1. Reduce water evaporation, and utilize the cooling effect of water to increase the power generation. 2. The bracket is made of aluminum alloy for fireproof. 3. Easy to install without heavy equipment; safe and convenient to maintain. Installation Water Surface Surface Wave Height ≤0.5m Surface Flow Rate ≤0.51m/s Wind Load ≤36m/s Snow Load ≤0.45kn/m2 Tilt Angle 0~25° Standards BS6349-6, T/CPIA 0017-2019, T/CPIA0016-2019, NBT 10187-2019, GBT 13508-1992, JIS C8955:2017 Material HDPE, Anodized Aluminum AL6005-T5, Stainless Steel SUS304 Warranty 10 Years Warranty Project Reference
In recent years, with the development of the photovoltaic industry, land and roof resources have gradually decreased. Limited by the traditional support form, the undulating mountains, fish ponds with deep water levels, and sewage treatment plants with large spans cannot be fully utilized. The emergence of flexible bracket has solved the above problems, which is a new trend in the application of photovoltaic bracket. Flexible Mounting Structure Product Highlights · Reduce land occupation resources: The span is large, and the span spacing of 10~60m can be installed. · Increase the use of space: the height can be customized, and the height can be set to 2.5~16m. · Reduce the amount of steel: Through the use of cable structure, the cost of ordinary brackets can be effectively saved by 10~15% · Saving construction costs: The reduction in the number of pile foundations and the sliding characteristics of the cable structure can reduce the construction cost and period by 10-20%. All-weather unobstructed: Overcome the ups and downs of the mountains and increase the power generation by about 10%. Application: Flat terrain such as fishing light, agricultural light, desert, grassland, parking lot, sewage treatment plant and undulating terrain such as sloping land. Technical parameter Foundation Concrete/PHC Pile Application Flat terrain such as fishing light, agricultural light, desert, grassland, parking lot, sewage treatment plant and undulating terrain such as slope. Wind load 0.58 kN/m² Snow load 0.5 kN/m² Design standard Photovoltaic support structure design specification NB/T 10115, Building structure load code GB 50009 National standards such as JGJ 257 technical regulations for cable structures Material Hot-dip galvanized carbon steel, high vanadium cable (anti-corrosion) Warranty period 10 years warranty Case photo
online service
+86 592-5211-388
info@esolarfirst.com
sales004_solarfirstsales12_solarfirstsales10_solarfirst
+86 18959208686
+86 592-5211-388
English
français
Deutsch
русский
español
português
العربية
日本語
한국의
Indonesia
