+86 592-5211-388

info@esolarfirst.com

Products

Home /Solar Roof Mount /SF BIPV Roof Mount /SF BIPV ROOF MOUNT

Hot Products

SF BIPV ROOF MOUNT


  • Product Details


Design Description: Suitable for herringbone bi-directional ballasted system, which can better effectively resist the effect of negative wind pressure

Installation

 Ground/Concrete Roof/Fence

Wind Load

 up to 60m/s

Snow Load

 1.4kn/m²

Tilt Angle

 ≥3°

Standards

 GB50009-2012, EN1990:2002, ASE7-05, AS/NZS1170, JIS C8955:2017, GB50017-2017

Material

 Anodized Aluminum AL6005-T5, Stainless Steel SUS304Hot Dip Galvanized Steel

Warranty

 10 Years Warranty

Send a Message
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Product

Solar PV carport mounting structures

High quality Solar Carport Mounting System Steel Frame Solar Canopy

Solar First Carport Mounting System product introduction specializes in Solar First carport mounting manufacturing and designing to meet the needs of various pole mount installation.

Energy Storage Systems

Energy Storage Systems

SF-HVT SERIES The SF -HVT series household lithium batteries adopt afully automatic thermal management system, CTP no-moduletechnology, high-efficiency heat pump heating technology, andaluminum alloy body design, which will expand the workingtemperature range of the battery,increase the consistencybetween battery cells, and achieve a more flexible appearancedesign. This will achieve a new generation of householdenergy storage lithium batteries with safer, more exquisite, andlonger service life. Fully automated thermal management system SOLARFIRST's self-developed lithium battery thermal management system(BTMS)ismainly alithium battery temperature control technology system that uses circulating liquid as the medium for heat exchange. CTP TECHNOLOGY The CTP technology(Cell To Pack)of SOLARFIRSTThe CTPhousehold energy storage lithium batteries directly integratesthe battery cells into a battery pack, subtracting the modulelink, forming a non module form, which improves the overallenergy density.The battery thickness is only 18cm,significantly reducing the volume and failure rate compared todomestic high-voltage stacked lithium battery products on themarket, greatly improving safety, and having no wiring harnessand connector connections between modules, making thestructure simpler, Installation is extremely convenient, whilealso reducing the weight of the battery pack. SF-ELS-T SERIES LITHIUM BATTERY Model SF-ELS10K-T SF-ELS14K-T Battery Type LiFePO4 Standard voltage 51.2Vdc 51.2Vdc Voltage range 46.4~57.6Vdc 46.4~57.6Vdc Cell capacity 200Ah 280Ah BAT capacity 10.24kWh 14.33kWh DOD Max.100 % DOD (settable) Cycle life(25℃,0.5C/0.5C,80%DOD) >6000 >10000 Rated power 7000W 10000W Max Charge/Discharge current 140A 200A Dimension (H*W*D) 1169.5*640*196mm 1169.5*640*196mm Weight 114.5kg 137.5kg BAT Operating ambient temperature -20~60℃ Cell Continuous Operating Temperature 10~35℃ DisplayHumidity 0~95%RH(Non-condensing) Thermal management Type Liquid Cooling/Heating Display LED+APP Communication RS485,CAN Installation Floor mounted & Fixed to wall IP Grade IP65 Certification CE,IROHS,MSDS,IEC 62619.UN 38.3.CE-EMC SF-HVT SERIES LITHIUM BATTERY   Model SF-8K-HVT SF-9K-HVT SF-11K-HVT SF-13K-HVT SF-14K-HVT Battery Type LiFePO4 Standard voltage 172.8Vdc 192Vdc 230.4Vdc 259.2Vdc 288Vdc Voltage range 156.6~194.4Vdc 174~216Vdc 208.8~259.2Vdc 234.9~291.6Vdc 261~324Vdc Cell capacity 50Ah BAT capacity 8.64kWh 9.6kWh 11.52kWh 12.96kWh 14.4kWh DOD Max.100 % DOD (settable) Cycle life(25℃,0.5C/0.5C,80%DOD) >8000 Rated power 6000W 6500W 8000W 9000W 10000W Max Charge/Discharge current 50A Dimension (H*W*D) 1116.5*640*197mm 1196*640*197mm 1356*640*197mm 1475.5*640*197mm 1595*640*197mm Weight 103.5kg 113.5kg 130kg 145kg 153.2kg BAT Operating ambient temperature -20~60℃ Cell Continuous Operating Temperature 10~35℃ DisplayHumidity 0~95%RH (Non-condensing) Thermal management Type Liquid Cooling/Heating Display LED+App Communication RS485, CAN Installation Floor mounted & Fixed to wall IP Grade IP65 Certification CE,IROHS,MSDS,IEC 62619, UN 38.3.CE-EMC

Ground Aluminum Bracket

SF ALUMINUM GROUND MOUNT - CONCRETE FOUNDATION

Solar Ground Mounting System is applied to large commercial solar plant for public utilities. This is a single column mounted system which is suitable for both frame and frameless modules.

Horizon D+ Series Multi-Point Drive Single Axis Solar Tracking Systems

Horizon D+ Series Multi-Point Drive Single Axis Solar Tracking Systems

Features & Characteristics High Adaptability High Adaptability  Gradient difference adaptability to uneven terrain in N-S direction up to 15% High Stability  The multi-point drive greatly increase the wind torsion resistance and critical wind speed Compatibility  Compatible to 182/210mm cell solar modules Accessibility  Obstacle-free among independent trackers, easy for construction and maintenance Reliability  The independent control system help to monitor the operation, find fault points in time, and reduce power output loss Smart Tracking  Adjust tilt angle smartly and timely according to terrain and weather data to increase power output Reasonable Design  The stability is ensured via exclusive structural design and strict wind tunnel test Tracker Structure Tracking Technology Horizontal Single Axis Tracker System Voltage 1000V/1500V Tracking Range ±45° Working Wind Speed 18 m/s (Customizable) Max. Wind Speed 45 m/s (ASCE 7-10) Modules per Tracker ≤120 Modules (Customizable) Principal Materials Hot-Dip Galvanized Q235B/Q355B, Zn-AI-Mg Coated Steel Mean Coating Thickness ≥65 micron Drive System Slewing Drive / Linear Actuator Foundation type PHC / Cast-in-Place Pile / Steel Pile Control System Control System MCU Tracking Mode Closed Loop Time Control + GPS Tracking Accuracy <2° Communication Wireless (ZigBee, LoRa); Wired (RS485) Powder Acquisition External Supply / String Supply / Self-Powered Auto Stow at Night Yes Auto Stow During High Winds Yes Optimized Backtracking Yes Protection Degree IP65 Working Temperature -30°C-65°C Anemometer Yes Power Consumption 0.3kWh per day Project Reference

Aluminum Solar Ground Carport Mounting

Easy Installation Solar Carport Mounting System Solar Aluminum W type Carport Mounting

Solar Carports offers a fexible,simple and affordable solution for Solar Mounting System.Solar carports utilize exisiting parking areas to generate renewable power and provide shaded or covered parking for autos,electric charges,on gird mw solar systems.

Smart Street Light

Smart Street Light

Characteristics ·Reserve 5G base station interface for 5G communication equipment ·Intelligent lighting, supports remote switch lights, dimming, timing, etc ·Built-in high-definition camera, users can remotely monitor the road picture through mobile phone or PC ·The light pole is equipped with WIFI hotspot equipment, and the surrounding users can connect to the WIFI hotspot for Internet browsing ·Built-in broadcasting speakers, support remote audio transmission for remote intercom ·Built-in a variety of weather sensors for environmental monitoring ·Equipped with outdoor LED screen, support remote sending of information, display real-time weather information, advertising information, etc ·With one-button alarm function, quickly report accident information and intelligent unlocking ·Smart unlock   Application ·High-tech park       ·Tourist scenic area       ·Park plaza       ·Commercial district System Parameters Light pole The pole height is 4~13 meters, material: high-quality steel Q235; process: hot dip galvanized inside and outside, surface polyester powder coating; protection level: IP65 LED lights Power: 40W~150W; working voltage: AC220V/50Hz; color temperature: white light 4000~5500K; protection level: IP67 Security camera 2/4 million outdoor high-speed PTZ ball machine; support 1080p@60fps, 960p@60fos, 720p@60fos high frame rate output; support 360° horizontal rotation, vertical direction -15°-90°; lightning protection, anti-surge; water protection grade: IP66 Digital broadcasting Power: 20W~40W; protection level: IP65 One-button alarm Support RJ45 interface/UDP/TCP/RTP protocol; audio sampling: 8kHz~441kHz LED information release Outdoor display screen; size: 480*960/512*1024/640*1280mm (optional); pixel density: 128pix*256pi k; brightness level: ≥5000cd/m; refresh rate: >1920Hz; RJ45 network interface; working voltage : AC220V/50Hz; water protection grade: IP65 Environmental monitoring PM2.5/PM10 particle range: 0.3~1.0/1.0~2.5/2.5-10um; measurement range: 0~999ug/m³; accuracy ±0.1ug Carbon dioxide; effective range: 3000-5000ppm, accuracy: ±(50ppm+5%Fs); resolution: 1ppm Noise: 30~110dB, ±3%Fs Weather monitoring Air temperature: -20℃~90℃; resolution: 0.1℃ Atmospheric pressure: measuring range 1~110kPa Light intensity: 0~200000Lux; resolution: 1Lux Wind speed: starting wind 0.4~0.8m/s, resolution 0.1m/s; wind direction: 360°, dynamic speed ≤0.5m/s Wind direction: range: 0-360°, accuracy: earth 3°, resolution: 1°, starting wind speed: ≤0.5m/s LED single lamp power saving control Single lamp monitoring: voltage AC0~500V, current AC0~80A, output control: AC200V/10A; voltage, current, power, power factor collection; dimming interface: DC0~10V; light-off failure alarm Charging pile AC charging AC220V/50Hz; power 7kW; credit card or WeChat payment Network equipment 5G micro base station, antenna: 64 antenna interface; channel width: 20/40/50/60/80/100MHz Wireless AP (Wifi): Coverage from 100 meters to 300 meters, transmission standard: 802.11a, 802., dual-band concurrent 2.4G, built-in firewall Mobile client Mobile APP Power cord accessories National standard rubber insulated cable three-core YZ3mm*2.5mm square power cord; 3P/63 circuit breaker, etc

SF METAL ROOF MOUNT - MINI RAIL

SF METAL ROOF MOUNT - MINI RAIL

Solar First Mini Rail Clip Lock is well-received by customers and is widely applied in our Malaysian Rooftop projects. Solar First Mini Rail Clip Lock used in Malaysia 4MW Rooftop. Project is made of AL6005-T5 and SUS304 bolts, and is locked on metal roof directly. End Clamp Kits and Mid Clamp Kits are placed above the Clip Locks to fix the solar panels tight.

SYMMETRICAL BALLATED ROOF MOUNT

SYMMETRICAL BALLATED ROOF MOUNT

Design Description: Suitable for herringbone bi-directional ballasted system, which can better effectively resist the effect of negative wind pressure

High Quality Standing Seam Clamp

High Quality Standing Seam Clamp for Tin Roof

Solar First Roof Standing Seam Clamp is widely applied for commercial and residencial roof project.The system is designed for metal roof, which is very popular with customers, the wide range of different components make it possible to fasten almost all sorts of module.

Thin Film Solar Panel Clamp,Frameless Solar Panel Clamp

Thin Film Solar Panel Clamp,Frameless Solar Panel Clamp

Thin Film Solar Panel Clamps,size 80mm,120mm,150mm.Application  for module 6-9mm frameless thin film solar module.

SF Steel Cantilever Carport

SF Steel Cantilever Carport

Steel Solar Ground Carports offers a fexible,simple and affordable solution for solar mounting system.solar carports utilize exisiting parking areas to generate renewable power and provide shaded or covered parking for autos,electric charges,on gird mw solar systems.

 
chat Now Request A Free Quote
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!