+86 592-5211-388

info@esolarfirst.com

Products

Home /Flexible Mounting Structure /SF Double Layer Flexible Mounting Structure

Hot Products

SF Double Layer Flexible Mounting Structure

  • Product Details


Technical Details
Installation
 Ground
Foundation
 PHC/Cast-in-place Pile
Modules Layout
 Single Row in Portrait
Single span
 ≤50m
Wind Load
 0.45KN/㎡ (Adjustable according to the project)
Snow Load
 0.15KN/㎡ (Adjustable according to the project)
Tilt Angle
 ≤15°
Standards
 GB 50009-2012、GB 50017-2017、NB/T 10115-2018、JGJ257-2012、JGJT 497-2023
Material
 Anodized Aluminum AL6005-T5, Hot Dip Galvanized Steel, Zn-Al-Mg pre-coated steel,Stainless Steel SUS304
Warranty
 10 Years Warranty




Send a Message
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Related Product

SF Single Layer  Flexible Mounting Structure

SF Single Layer Flexible Mounting Structure

Technical Details Installation  Ground Foundation  PHC/Cast-in-place Pile Modules Layout  Single Row in Portrait Single span  ≤20m Wind Load  0.45KN/㎡ (Adjustable according to the project) Snow Load  0.15KN/㎡ (Adjustable according to the project) Tilt Angle  ≤30° Standards  GB 50009-2012、GB 50017-2017、NB/T 10115-2018、JGJ257-2012、JGJT 497-2023 Material  Anodized Aluminum AL6005-T5, Hot Dip Galvanized Steel, Zn-Al-Mg pre-coated steel,Stainless Steel SUS304 Warranty  10 Years Warranty

Flexible Mounting Structure

Flexible Mounting Structure

In recent years, with the development of the photovoltaic industry, land and roof resources have gradually decreased. Limited by the traditional support form, the undulating mountains, fish ponds with deep water levels, and sewage treatment plants with large spans cannot be fully utilized. The emergence of flexible bracket has solved the above problems, which is a new trend in the application of photovoltaic bracket.   Flexible Mounting Structure Product Highlights   ·  Reduce land occupation resources: The span is large, and the span spacing of 10~60m can be installed.   ·  Increase the use of space: the height can be customized, and the height can be set to 2.5~16m.   ·  Reduce the amount of steel: Through the use of cable structure, the cost of ordinary brackets can be effectively saved by 10~15%   ·  Saving construction costs: The reduction in the number of pile foundations and the sliding characteristics of the cable structure can reduce the construction cost and period by 10-20%.   All-weather unobstructed: Overcome the ups and downs of the mountains and increase the power generation by about 10%.   Application:   Flat terrain such as fishing light, agricultural light, desert, grassland, parking lot, sewage treatment plant and undulating terrain such as sloping land. Technical parameter Foundation Concrete/PHC Pile Application  Flat terrain such as fishing light, agricultural light, desert, grassland, parking lot, sewage treatment plant and undulating terrain such as slope. Wind load 0.58 kN/m² Snow load 0.5 kN/m² Design standard Photovoltaic support structure design specification NB/T 10115, Building structure load code GB 50009 National standards such as JGJ 257 technical regulations for cable structures Material Hot-dip galvanized carbon steel, high vanadium cable (anti-corrosion) Warranty period 10 years warranty Case photo 

SF FENCE

SF FENCE

Why Fence ·To effectively protect personnel safety both inside and outside the project site. ·To prevent theft.

SF METAL ROOF MOUNT - KLIP LOK ROOF CLAMPS

SF METAL ROOF MOUNT - KLIP LOK ROOF CLAMPS

Solar panel mounting system for klip lok type metal roofing sheet.

Adjustable triangle mounting system solar bracket on roof

Triangle Roof Mounting System Adjustable Solar Bracket

Triangle Roof Mounting System Adjustable Solar Bracket fits for most of available solar panels, and they can scale easily from small to large installations. Solar First all has a strict control process to ensure the mounting structural strength and the life of system.

Portable PV System

Portable PV System

Characteristics   · Dual CPU intelligent control technology, with pure sine wave AC output, adapted to various types of loads. · Uility power mode (mains mode) lenergy saving mode/battery mode can be set. Flexible application · 5VDC-USB output, convenient and practical · Easy to carry   Application   ·Expeditions   ·Outdoor camping   ·Night Market lighting   ·Home lighting   ·Poverty areas   System Parameters   System power 0. 3KW 0.5KW 1KW Solar panel power 180W 250W 360W Number of solar panels 2片 Photovoltaic DC cable 1 SET MC4 connector 1 SET Controller 12V30A 24V20A 24V30A Lithium battery/Lead-acid battery(Gel) 12V 24V Battery capacity 60Ah 120Ah DC output 5V2A USB Output ×2 Inverter AC input side voltage 170-275V Inverter AC input side frequency 45-65HZ Inverter off-grid rated output power 0. 3KW 0.5KW 1KW Rated output voltage on off-grid side 1/N/PE, 220V Rated output frequency on off-grid side 50Hz Working temperature 0~+40°C Cooling method Air-cooled AC output copper core cable 1 SET Distribution box 1 SET Auxiliary material 1 SET Photovoltaic mounting type Aluminum /Carbon steel mounting(one set)

Energy Storage Systems

Energy Storage Systems

SF-HVT SERIES The SF -HVT series household lithium batteries adopt afully automatic thermal management system, CTP no-moduletechnology, high-efficiency heat pump heating technology, andaluminum alloy body design, which will expand the workingtemperature range of the battery,increase the consistencybetween battery cells, and achieve a more flexible appearancedesign. This will achieve a new generation of householdenergy storage lithium batteries with safer, more exquisite, andlonger service life. Fully automated thermal management system SOLARFIRST's self-developed lithium battery thermal management system(BTMS)ismainly alithium battery temperature control technology system that uses circulating liquid as the medium for heat exchange. CTP TECHNOLOGY The CTP technology(Cell To Pack)of SOLARFIRSTThe CTPhousehold energy storage lithium batteries directly integratesthe battery cells into a battery pack, subtracting the modulelink, forming a non module form, which improves the overallenergy density.The battery thickness is only 18cm,significantly reducing the volume and failure rate compared todomestic high-voltage stacked lithium battery products on themarket, greatly improving safety, and having no wiring harnessand connector connections between modules, making thestructure simpler, Installation is extremely convenient, whilealso reducing the weight of the battery pack. SF-ELS-T SERIES LITHIUM BATTERY Model SF-ELS10K-T SF-ELS14K-T Battery Type LiFePO4 Standard voltage 51.2Vdc 51.2Vdc Voltage range 46.4~57.6Vdc 46.4~57.6Vdc Cell capacity 200Ah 280Ah BAT capacity 10.24kWh 14.33kWh DOD Max.100 % DOD (settable) Cycle life(25℃,0.5C/0.5C,80%DOD) >6000 >10000 Rated power 7000W 10000W Max Charge/Discharge current 140A 200A Dimension (H*W*D) 1169.5*640*196mm 1169.5*640*196mm Weight 114.5kg 137.5kg BAT Operating ambient temperature -20~60℃ Cell Continuous Operating Temperature 10~35℃ DisplayHumidity 0~95%RH(Non-condensing) Thermal management Type Liquid Cooling/Heating Display LED+APP Communication RS485,CAN Installation Floor mounted & Fixed to wall IP Grade IP65 Certification CE,IROHS,MSDS,IEC 62619.UN 38.3.CE-EMC SF-HVT SERIES LITHIUM BATTERY   Model SF-8K-HVT SF-9K-HVT SF-11K-HVT SF-13K-HVT SF-14K-HVT Battery Type LiFePO4 Standard voltage 172.8Vdc 192Vdc 230.4Vdc 259.2Vdc 288Vdc Voltage range 156.6~194.4Vdc 174~216Vdc 208.8~259.2Vdc 234.9~291.6Vdc 261~324Vdc Cell capacity 50Ah BAT capacity 8.64kWh 9.6kWh 11.52kWh 12.96kWh 14.4kWh DOD Max.100 % DOD (settable) Cycle life(25℃,0.5C/0.5C,80%DOD) >8000 Rated power 6000W 6500W 8000W 9000W 10000W Max Charge/Discharge current 50A Dimension (H*W*D) 1116.5*640*197mm 1196*640*197mm 1356*640*197mm 1475.5*640*197mm 1595*640*197mm Weight 103.5kg 113.5kg 130kg 145kg 153.2kg BAT Operating ambient temperature -20~60℃ Cell Continuous Operating Temperature 10~35℃ DisplayHumidity 0~95%RH (Non-condensing) Thermal management Type Liquid Cooling/Heating Display LED+App Communication RS485, CAN Installation Floor mounted & Fixed to wall IP Grade IP65 Certification CE,IROHS,MSDS,IEC 62619, UN 38.3.CE-EMC

20W 30W 40W Aluminum Waterproof Solar Street LED Light

Aluminum Waterproof Solar Street LED Light

Aluminum Waterproof Solar Street LED Light, simple design,practical,powered by solar, saving energy and environmental friendly.

Horizon S Series Solar Tracking Systems

Horizon S Series Solar Tracking Systems

Horizontal Single Axis Traker

L angle for tin roof

Aluminum L Foot for Solar Mount System

Solar L Foot use for Tin Roof PV Mounting System, with high quality and low price.

Solar PV Roof Mounting Ballast Structure System

Concrete Flat Roof Solar Mounting System Ballasted Roof Mount

Best configuration,fast installation,Solar First PV Ballasted Mounting System through added ballasts to provide a non penetration system. no leakage issue and save the labor cost.

Ground screw pile

Galvanized Ground Screw Pile Anchor with Flange

Ground Screw System is a modern foundation system,using the drilling machine to install which makes it as the most efficient and cost-saving footing solution.It can be widely applied to different soil conditions. Ground screw can be used for many kinds of application, like solar system; timer-fram

 
chat Now Request A Free Quote
If you have any problem when using the website or our products, please write down your comments or suggestions, we will answer your questions as soon as possible!Thank you for your attention!